Technical Specification
- Description
- LITIO Enduro
| Product model | ENDURO-4828-2 |
| Chemistry | NMC |
| Normal voltage | 48V |
| Rated capacity | 28Ah |
| Energy | 1344Wh |
| Charging mode | CC/CV |
| Ingress protection | IPX7 |
| Charge voltage | 54.6 |
| Standard cut off voltage | Charge cut off voltage – 54.6V Discharge cut off voltage- 35.1V |
| Standard charge current at 0.5C | 14A |
| Max continuous Charge current | 6A |
| Max Continuous Discharge current | 30A for <20 min |
| Nominal discharge current is at 1C | 28A |
| Peak discharge current | 30A for <20 Min |
| BMS Protections | Cell balancing/ Overcharge/ Over-discharge / Short-circuit/Charging low – high temperature/ Discharging low- high temperature Protection |
| Connectors | 1:Charge port : Microphone charge port 2:Discharge port : 2+6 discharge port |
| Life cycle | 1000 cycles @ 80% DoD at 0.5C charge and 1C discharge |
Application
E-scooter
- Description
- LITIO Strong
| Battery Model | Strong 4880 | |||||
| Chemistry | LFP | |||||
| Configuration | 1P 15S | |||||
| Capacity (Wh) | 3840 | |||||
| Charge cut off voltage (V) | 54 | |||||
| Discharge cut off voltage (V) | 40.5 | |||||
| Charge Method | CC/CV (Matched Charger) | |||||
| Smart BMS | Protection @ high/low temp/over current/over-charge/discharge with Cell Balancing |
|||||
| Continuous Charging current (A) | 40 | |||||
| Max continuous discharge current (A) |
80 | |||||
| Max discharge current (A) | 120 for 1s | |||||
| Temp Profile {@ 60~80% SOC) |
|
|||||
| Humidity | <= 85% non condensing | |||||
| Communication | CAN | |||||
| Waterproof | IP6X | |||||
| Connectors | SB50 (both positive and negative) | |||||
| Battery Dimension (LxBxH) | 560mm x 255mm x 232mm |
|||||
| Battery Weight | ~45kg | |||||
Application
Light electric vehicles